Programming instructions

RTCA/DO-160 for Airborne Equipment

To test airborne equipment according to the RTCA/DO-160 specification, select

RTCA/DO-160 in the Tests menu. Only single-phase equipment is supported,

three-phase equipment is not supported.

To configure the Test Pass/Fail criteria of the RTCA/DO-160 tests, click

Options. You can specify either ac input or dc input tests. Note that both

Pass/Fail criteria must be true for the ac or dc input tests to pass.

Click

Select the

Pass/Fail criteria

for the test items.

Check the test

items to include in

the test

Click here to start

the test.

When baes on input power, the

ac source measures the input

power of the DUT at the

beginning and end of each test

Sends completed

test results to the

default printer.

Test passes if the difference in

input power at the start of test

and at end of the test is <= to the

% of power difference specified.

Test also passes if the input

power is >= to the minimum

power specified in Watts.

Indicates which

item is presently

being tested.

Indicates the

total estimated

time of test.

Select the test