User`s guide

M3000A/M3046A/M3015A/M3016A Service Guide
Installing the Instrument 2-23
Installing the Universal Bed Hanger (M3080A #A11)
The hanging mount is used for hanging the Monitor on the bed footboard/headboard or a rail.
It is delivered ready-to-use and does not require installing.
6WHS Unpack the Bed Hanger and check all parts are available.
6WHS Rotate the arms to their open position.
6WHS Hang the hanger on the rail (or as appropriate).
6WHS If necessary, adjust the bed hanger to a vertical position by pulling out the slider at
the rear of the hanger.
6WHS If necessary, fix the bed hanger by hooking the rubber strap around a vertical bar (as
shown in the insert).
The Monitor snap-fits onto the plate. To release the Monitor, press the button on the front of
the plate.
Warnings, Cautions, and Safety Precautions Relating to Wall
Mount Installation
• Make sure that you have read all applicable instructions before attempting to install the wall
mount.
• Wall mounts that are intended to support monitors must be capable of supporting four times
the weight of the Monitor when properly installed.
If wall mounts are to be installed on plaster board walls, we recommend that the mounts be
Slider