User`s guide
M3000A/M3046A/M3015A/M3016A Service Guide
2-10 Installing the Instrument
To remove the Measurement Server from the Monitor, move the latch (in the middle at the
top of the Monitor) toward the front of the Monitor, and slide the Measurement Server away
from the link bar.
ZLWKWKH0$0HDVXUHPHQW6HUYHU6HSDUDWHIURPWKH0RQLWRU
You can connect the Measurement Server to the Monitor using a server link cable as follows:
6WHS You can connect the cable to the plug on the link bar, or directly to the Monitor as
follows:
To remove the link bar,
a. Turn the latch guard away from the edge of the latch.
a. Unlatch the link bar from the back of the Monitor.
b. Slide the link bar away from the Monitor.
6WHS Attach the socket end of the cable to the Monitor.
6WHS Attach the other end of the cable to the Measurement Server or, if present, the
M3015A/M3016A Measurement Server Extension.
Latch
Link Bar
Latch