User`s guide

M3000A/M3046A/M3015A/M3016A Service Guide
Installing the Instrument 2-7
The box containing your Measurement Server contains only the Measurement Server.
The box containing an M3016A Measurement Server Extension contains only the
Measurement Server Extension.
The box containing an M3015A Measurement Server Extension contains the Measurement
Server Extension and the associated accessories.
In addition you should receive all of the options and accessories that you have ordered.
If anything is missing, contact your Agilent Technologies representative immediately.
If anything has been damaged in transit, keep the packing material for inspection and contact
your Agilent Technologies representative immediately.
Do not use the Monitor if the casing has been damaged.
If the Monitor is damaged, make sure that the screen is not leaking. There is no known danger
from the fluid of irritation to skin or eyes, or by inhalation. The median lethal dose if taken
orally is 2.0g/kg.
There are no special procedures necessary for cleaning spilled fluid.
Installing the Monitor
&$87,21
Avoid placing the Monitor, Measurement Server or Measurement Server Extension
underneath an infusion bag. Make sure that infusion liquid cannot get into any of the
Measurement or Monitor connectors.
Be sure to read the sections on “Preparing to Install the Monitor” and “Unpacking the
Monitor” earlier in this chapter before continuing.
To install the Monitor you must make sure it has an adequate power supply (see Preparing to
Install the Monitor section earlier in this chapter for information about AC power, and the
“Using Your Monitor in Patient Transport” chapter in the User’s Guide for information about
using batteries).
Switch the Monitor on using the 2Q2II6WDQGE\button.
0DNLQJWKH$OWLWXGH6HWWLQJ
A correct altitude setting is important to ensure accurate CO
2
readings .
Silence
Reset
Suspend
Setup
On
Off/Standby
AC Power
Battery
On-Off/Standby