User`s guide
M3000A/M3046A/M3015A/M3016A Service Guide
Installing the Instrument 2-5
([SODQDWLRQRIV\PEROVXVHG
The following are the markings on the back of the Monitor:
Standby for switching the Monitor on and off.
Attention, consult accompanying documents.
Infra-red Connector for connection to a printer.
On the Measurement Server - Defib Data In, that is the ECG marker
pulse sent from the defibrillator to the Monitor. The marker pulse is then
processed with the ECG signal and displayed on the Monitor.
On the M3015A Measurement Server Extension - Gas Input
On the Measurement Server - ECG Data Out is the analog ECG signal
sent out from the Monitor to a defibrillator or other external device, such
as an intra-aortic balloon pump.
On the M3015A Measurement Server Extension - Gas Outlet/Exhaust
Alternating Current
Equipotential Grounding Post (see Equipotential Grounding earlier in this
chapter)
Battery Compartment
Type CF Applied Part and GHILEULOODWRUSURRIwith special protection
against electric shocks for intracardiac application (regarding allowable
leakage currents by having an F-Type isolated or floating section).
Indicates a Monitor with Wireless LAN Interface (symbol appears on
carrying handle)
This device complies
with FCC part 15
of the FCC rules.
Operation is subject to
the following two conditions:
(1) this device may not
cause harmful interference.
and
(2) this device must accept
any interference received,
including interference that
may cause undesired
operation.