User`s guide

M3000A/M3046A/M3015A/M3016A Service Guide
6-22 Repairing the Instrument
General Reassembly/Refitting Comments
• Battery Door—When inserting the Monitor chassis, always open the battery compartment
door to avoid striking the door clip.
• Ribbon Connections—Make sure male-female ribbon connections are correctly lined-up.
• Open Component—Do not allow anything to fall into the open component.
Following Reassembly
Once you have reassembled the Instrument, you must perform a safety and performance
check on the Instrument. Refer to "Maintaining the Instrument" and "Testing the Instrument".