User`s guide

M3000A/M3046A/M3015A/M3016A Service Guide
Installing the Instrument 2-31
Installing the Measurement Server Mounting Options
To allow the Measurement Server to be mounted remotely from the Monitor, special
mounting plates are available. One plate can be used to mount the Server to a wall or other
fixture. The second type can be used for vertical or horizontal mounting on a pole or rail.
6HUYHU0RXQWLQJ3ODWH0$$
This option includes a pack of 5 mounting plates. To mount the plate securely, you need 2
screws per plate. These are not provided because the type of surface dictates the type of
screw.
6WHS Unpack the plates and check all parts are available.
6WHS Select a plate and 2 screws (appropriate to surface material).
6WHS Insert the 2 screws through the screw holes provided in the plate.
6WHS Tighten the screws.
The Server snap-fits onto the plate. To release the Server, press and hold the latch (in the
middle at the top of the mount) away from the Server and slide it out.
Latch