User`s guide

M3000A/M3046A/M3015A/M3016A Service Guide
2-28 Installing the Instrument
$WWDFKHGWRD8QLYHUVDO3ROH&ODPS
This option is used to attach the Tilt/Swivel mount to a Universal Pole clamp. The Monitor
can then be mounted on a pole or rail and can provide tilt and swivel capability.
6WHS Unpack the Tilt/Swivel mount and check all parts are available.
6WHS Remove the adapter plate (this is only necessary for the GCX Wall Channel).
6WHS Secure the rail to the Tilt/Swivel mount with the 2 screws provided.
6WHS Decide whether the tilt/swivel mounting is to be secured for vertical positioning (on
a pole) or for horizontal positioning (on a rail).
6WHS Secure the pole clamp to the tilt/swivel mounting with the two screws provided.
6WHS Tighten the screws.
6WHS Attach the clamp to a pole or rail.
6WHS Use adjustment knobs to adjust to the required tilt/swivel angle.
Hang the bed hanger over the rail.
Rail