Technical data

83
S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\softbw14.fb
Chapter 3, Using the Software/HP 8920A FW Rev. Below A.14.00
Customizing Testing
Saving a Test Procedure Using the Procedure Manager
A Test Procedure is a collection of pass/fail limits (specifications), the test
environment and conditions (parameters), and a TEST sequence, saved in a file
that customizes the test software to a specific application. You may save the file to
a memory card or disk.
When you save a Procedure you will be saving parameters, specifications, and a
test sequence, plus a library that contains the names of all parameters,
specifications, and tests that are resident in the HP 11807A software. The library
file comes from the HP 11807A software and cannot be modified. The library file
will be automatically saved on the card or disk that is being used to store the new
test procedure.
The following example shows how to save a new procedure to a memory card.
For more information concerning procedures,
see "Procedures," in chapter 5, on
page 225
.