Technical data

81
S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\softbw14.fb
Chapter 3, Using the Software/HP 8920A FW Rev. Below A.14.00
Customizing Testing
Changing the Test Environment and Conditions (Edit Parameters)
The software uses parameters to optimize the test environment and conditions for
your testing situation. Many of the parameters are determined by examining your
test needs. Other parameters are determined by performing measurements to
calibrate items in your system. Examples of parameters include cable losses, rated
system deviation, and the audio test tone frequency your system requires. The HP
11807A software comes with default settings for parameters. The defaults should
be reviewed for your particular needs.
See "Test Parameter Descriptions," in
chapter 4, on page 112
for descriptions and default values for each parameter. For
information on saving customized parameters, see
"Saving a Test Procedure Using
the Procedure Manager" on page 83
.
The following describes how you can change parameters through the Edit
Parameter screen to optimize your testing conditions.
How to Change the Test Environment and Conditions