Technical data

68
S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\softbw14.fb
Chapter 3, Using the Software/HP 8920A FW Rev. Below A.14.00
Customizing Testing
Changing the Order of Tests (Edit Sequence)
You may define a test sequence to include all, some, or just one of the tests
available. When the first test is finished, the next will run. The test sequence will
remain in the Test System’s battery backed-up memory until another test
sequence is loaded or set up. For information on saving a customized test
sequence,
see "Changing the Order of Tests (Edit Sequence)" on page 68.
Creation of a test sequence is accomplished by inserting or deleting tests from the
list of tests that come with the HP 11807A software package.
See chapter 4, "Test,
Parameter, and Pass/Fail Limit Descriptions" on page 89
, for test descriptions.
The
All Chans? field allows the user to decide to run the test on all channels
entered in the frequency table, or just the channels which are selected as
Prime in
the
Edit Freq screen. This feature allows the user the flexibility to use channels
that are selected as
Prime in all the tests in the sequence, and those selected as
non-prime in a subset of tests (those with a
Yes response in All Chans). For
more information,
see "Specifying Channel Information (Edit Frequency)" on page
72
.
The following describes how to create a new test sequence and enter a response to
All Chans.