Technical data

Index
266
T
Take It, 236
terminal emulator, 198
configuration, 195
DataStorm Technologies, Inc. Pro-
Comm, 193
HP AdvanceLink, 193
Test Execution Conditions, 54, 87, 234
Test Functions, 32, 66
Edit Frequency, 72
Edit Parameter, 48, 81
Edit Sequence, 68
Edit Specifications, 45, 78
Procedure Manager, 50, 83
test parameters
default values, 112
descriptions, 112
editing values, 209
general description, 209
Test Procedure Run Mode, 54, 235
test procedures, 50
don’t run, 241
saving, 225
to load, 241
test results
output failures, 234
printing using firmware above revision
A.14.00, 216
printing using firmware below revision
A.14.00, 221
retrieving from a disk, 198
retrieving from a memory card, 192,
207
saving, 189
security, 143
where sent, 234
test set
keying the UUT, 142
test system
overall description, 16
test time, 211
testing order
securing, 228
tests, 256
entering a sequence of, 34, 68
environment and conditions, 48, 81
list of available, 18
pausing or stopping, 211
reference information, 90
required order, 90
running, 24
TESTS (Pass/Fail Limits) screen
entering into, 210
TESTS screen, 256
threshold sensitivity, 105
adjust for, 160
threshold squelch sensitivity, 153, 154
for the receiver, 159
tight-squelch sensitivity, 105
for the receiver, 160
formula to calculate, 160
tolerance for setting volume
for the receiver, 129
tolerance window
for setting volume, 129, 246
tone codes
for CTCSS, 247
tone-code table
for CTCSS frequencies, 248
tone-squelch opening SINAD, 153, 154
transceiver
full-rated system deviation, 114
transmit
at rated power, 171
continuously, 138
transmitter
audio distortion, 96
audio sensitivity, 175
audio-distortion specification, 163
audio-frequency response, 95, 133
audio-frequency response specifica-
tion, 164
audio-response roll-off specification,
167
CD/CTCSS available, 134
CD/CTCSS control, 135
CD/CTCSS filter 1 option, 136
CDCSS deviation and frequency, 100
CT/CDCSS deviation specification,
169
CTCSS deviation and frequency, 100
CTCSS frequency-error specification,
170
current drain, 91
current-drain specification, 171
de-emphasis, 137
dekey between TX tests, 138
deviation, 94
deviation set and measure specifica-
tion, 172
FM hum and noise, 98
FM hum and noise specification, 173
frequency deviation, 95
frequency error, 92
frequency security, 143
frequency-error specification, 174
keying, 142
microphone connections for, 142
microphone sensitivity, 97
microphone sensitivity set and mea-
sure, 139
microphone-sensitivity specification,
175
modulation limiting, 94, 140
modulation-limiting specification, 176
output power, 93
output power at high supply specifica-
tion, 178
output power at high-supply low-
switch, 179
output power at low supply specifica-
tion, 180
output power at low switch, 141
output power at low-supply low-
switch, 181
output power at low-switch, 182
output-power specification, 177
pre-emphasis, 95
quick test, 111
residual AM hum and noise, 99, 183
user/system key the UUT, 142
TX Audio Frequency Response Roll %,
165
TX Audio Frequency Response Roll >2.5
kHz, 149