Technical data

257
Numerics
1-800 help line, 21
A
additional services available, 21
adjust volume, 124
AdvanceLink, 193
AF analyzer
400 Hz HPF filter option, 136
de-emphasis, 137
AM hum and noise, 99
residual, 183
ASCII file type, 190
at opening
SINAD, 151
audio distortion
for the transmitter, 163
audio distortion pass/fail limit
for the receiver, 146
audio distortion test
for the receiver, 102
for the transmitter, 96
audio frequency, 149
set the step size to vary, 125
audio input
is over-driven, 94
audio lines
carry other signals, 245
audio load impedance
for the receiver, 119
audio outpu
flatness, 95
audio output
at 40% of full-rated deviation, 150
measured, 108
audio power
maximum, 129
audio power, maximum
for the receiver, 123
audio response, 147
audio sensitivity, 150, 172
calculation of, 119
for the receiver, 108
audio squelch sensitivity test
for the receiver, 105
audio testing fails, 245
audio-bandpass response, 103
audio-frequency harmonic distortion,
163
audio-frequency response, 103, 167
delta from 6 dB/octave, 147, 164
for the receiver, 118
for the transmitter, 133
pre-emphasis, 164
step size, 118, 133
audio-frequency response test
for the transmitter, 95
audio-output power, 147
set the rated, 123
audio-response roll >2.5 kHz, 167
audio-squelch circuitry
uses CT/CDCSS, 120
audio-squelch sensitivity, 159, 160
Autostart, 87
Autostart Test Procedure on Power-Up,
235
Index
Index