Technical data

Glossary
256
S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\glossary.fb
store Store and save are used
synonymously and refer to putting data or
software on some memory device, such as
card, RAM.
tests Tests are a collection of
measurements (or a series of other tests)
which verify a particular specification value
or operation of the UUT. A sequence of
tests are contained in a test procedure.
TESTS screen The screen accessed by
pressing the TESTS key. It is used to
customize and execute (run) all automated
testing. Also referred to as the “Main
Menu”.
USER keys A group of keys located
immediately to the right of the test set’s
screen that allow the user to more rapidly
select certain functions without rotating and
pressing the knob. These key assignments
are displayed in the upper right portion of
the test set’s screen. The number on the left
of the function corresponds to the number
on the user key k1 to k5.
values The scalar quantities or numbers
inserted in the inverse video fields of the
pass/fail limits or parameters. Units of
measure (dB, inches, volts, watts, etc.) are
contained in the pass/fail limits and test
parameters.