Technical data

229
S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\referenc.fb
Chapter 5, Reference (Alphabetical)
Procedures
To un-secure a
procedure:
To un-secure a procedure, you must know the pass number.
1. Press TESTS.
2. Position the cursor to the Select Procedure Location (or Location) field
and select it.
3. From the Choices menu, select ROM.
4. Position the cursor to the Select Procedure Filename (or Procedure) field
and select it.
5. From the Choices menu, select IB_UTIL (or SECURE_IT).
6. Press k1 (Run Test).
7. Select the location of the procedure you want to un-secure: k1 memory (Card) or k2
(RAM).
8 Enter the name of the procedure you wish to un-secure.
9. If the procedure has any item secured, you will be asked for the pass number.
10 Proceed with the on-line instructions. Select the items you wish to un-secure.
11. When you are prompted, enter the pass number using the DATA keypad.