Technical data

227
S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\referenc.fb
Chapter 5, Reference (Alphabetical)
Procedures
Loading a Procedure
A procedure can be loaded from storage media into the test set’s battery-backed-
up memory by doing the following.
To load a
procedure:
1. Press TESTS.
2. Position the cursor to the Select Procedure Location (or Location) field
and select it.
3. From the Choices menu, choose the desired location where the procedure is stored
and select: Card, ROM, RAM or Disk.
4. Position the cursor to the Select Procedure Filename (or Procedure) field
and select it.
5. From the Choices menu, choose the procedure file that you want to load.
6. Read the Description (or Comment) field to ensure that the loaded procedure file
is the one you want.
Deleting a Procedure
Procedures can be removed from an SRAM memory card, disk or RAM by doing
the following.
To delete a
Procedure:
1. Press TESTS.
2. Select Save/Delete Procedure from the CUSTOMIZE TEST PROCEDURE list
(or Proc Mngr from the Test Function field).
3. Position the cursor to the Select Procedure Location (or Location) field
and select it.
4. From the Choices menu, select the desired location.
5. Position the cursor to the Enter Procedure Filename (or Procedure) field
and select it.
6. From the Choices menu, select the name of the procedure you wish to delete.
7. Press k2 (Del Proc) (or position the cursor to the Action field and select Delete
Procedure).
8. Press Yes if you wish to continue.