Technical data

222
S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\referenc.fb
Chapter 5, Reference (Alphabetical)
Printing
How to send an
Escape
Sequence:
1. Press TESTS.
2. Select Edit Cnfg from the Test Function field.
3. Position the cursor to the Inst# field and select it.
4. Rotate the knob until an empty Calling Name field appears, and select it.
5. Position the cursor to the Calling Name field and select it.
6. Enter ESCAPE SEQ using the characters in the Choices menu. Select Done when
you are finished.
7. Position the cursor to the Addr (address) field and select it.
8. Using the DATA keypad, enter 9 for serial printers, 15 for parallel printers, or 70X for
HP-IB printers, then press ENTER. .
9. Position the cursor to the Options field (directly under Calling Name) and select
it.
10 Select the desired sequence using the list of characters below the choices.