Technical data

221
S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\referenc.fb
Chapter 5, Reference (Alphabetical)
Printing
To print test results
1. Make sure that your printer is properly connected and configured as explained earlier
in this section.
2. Press TESTS.
3. Position the cursor to the Output Results To: field (or the Output
Destination field). Pressing knob will toggle the underlined selection. Select to
underline Printer.
4. Position the cursor to the Output Heading field and select it.
5. Using the list of characters in the Choices menu, enter a printout heading (optional).
Select Done when the heading is complete.
To send Escape Sequences to the printer
If you have revision B.xx.xx software, you may use the test set to send escape
sequences to control printer options such as pitch, margins, paper size, and so
forth. You may enter sequences which are compatible with your printer (use your
printer’s user’s manual for the available print features and corresponding escape
sequences). This function is not available with revision A.xx.xx software.
The software already has an implied escape character for the first sequence, you
need only to enter the escape sequence following the escape character. However,
if you are linking two or more sequences together, you must use the
~ to indicate
the escape character between each sequence. If the sequence exceeds the space
allotted in the options field, you may continue with additional escape sequences in
the next available
Options field. You must however, still enter Escape Seq in
the
Calling Name field and the appropriate address in the Addr field for all
subsequent entries.