Technical data

212
S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\referenc.fb
Chapter 5, Reference (Alphabetical)
Printing
Printing
You can print any of the following:
• Test results
• TESTS screens
• ”External Devices” (Edit Cnfg)
• ”Order of Tests” (Edit Seqn)
• ”Channel Information” (Edit Freq)
• ”Pass/Fail Limits” (Edit Spec)
• ”Test Parameters” (Edit Parm)
How to Print (task
list)
There are five basic steps to printing listed below. A detailed description of each of
these steps is at the end of this section.
1. Check to see if your printer is supported by the test set (see "Supported Printers" on
page 212).
2. Determine if your printer requires serial, parallel, or HP-IB connection. Connect the
printer to the appropriate port on the test set (see "Printer Connection" on page 213).
3. Configure the test set for your printer and its interface (see "Configuring the Test Set
for Printing" on page 215).
4. Instruct the test set what to print (see "To print test results:" on page 216.
Supported Printers
• HP ThinkJet printer
• HP QuietJet printer
• HP PaintJet printer
• HP DeskJet printer
• HP LaserJet printer
• Epson FX-80 printer
• Epson LQ-850 printer
If you do not have one of these printers, consult your printer’s manual for the
correct printer settings to emulate one of the supported printers.