Technical data

206
S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\referenc.fb
Chapter 5, Reference (Alphabetical)
Memory Cards
There are two ways to initialize a memory card to select the format. If you have a
terminal emulator attached to the test set, you can type a command into the
IBASIC command line. A second way to initialize a card is to run the ROM
program RAM_MNG.
To initialize an SRAM card using IBASIC
1. Press TESTS.
2. Select IBASIC Cntrl from the SET UP TEST SET list (or IBASIC from the
Test Function field).
3 Position the cursor to the IBASIC command line and select it.
4. Using the list of characters under the Choices menu, enter the following IBASIC
command:
For LIF format: INITIALIZE “:INTERNAL”
For DOS format:
INITIALIZE “DOS:INTERNAL”
To initialize an SRAM card using RAM_MNG
1. Press TESTS.
2. Position the cursor to the Select Procedure Location (or Location) field
and select it.
3. From the Choices menu, select ROM.
4. Position the cursor to the Select Procedure Filename (or Procedure) field
and select it.
5. From the Choices menu, select IB_UTIL (or RAM_MNG).
6. Press k1 (Run Test).
7 Follow the displayed instructions.
NOTE: Loading RAM_MNG will delete any procedure or program in memory.