Technical data

204
S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\referenc.fb
Chapter 5, Reference (Alphabetical)
Memory Cards
SRAM Memory Cards
A Static Random Access Memory (SRAM) Card can be used to store test results
and procedures you make. The following parts can be used.
SRAM memory cards use a lithium battery (For 11807A: part number CR 2016 or
HP part number 1420-0383. For 11807E: part number CR 2025 or HP part
number 1420-0509). Programs and data will be retained for over one year if the
memory card is stored at 25
° C. The memory card is powered by the test set while
it is inserted. Replace the battery while the memory card is inserted into a
powered-up test set. To retain data and programs, it should be replaced annually.
See the HP 8920A User’s Guide. The write-protect switch on an SRAM memory
card will write protect the card when it is set toward the outside of the card.
Table 12 SRAM Memory Card Products for HP 8920A,D
Memory Product
32 kilobytes HP 85700A
128 kilobytes HP 85702A
256 kilobytes HP 85704A
512 kilobytes HP 85705A
Table 13 PCMCIA SRAM Memory Card Products for the
HP 8920B
Memory Product
64 kilobytes HP 83230A
256 kilobytes HP 83233A
1 megabyte HP 83231A