Technical data

191

S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\referenc.fb

Chapter 5, Reference (Alphabetical)

Data Collection (Saving and Retrieving Test Results)

See "Initializing a Disk" on page 198 if using a new disk. See "Initializing a

Memory Card" on page 205

if using a new memory card. The file types under LIF

can be used by the test set’s IBASIC controller and some HP workstations. The

DOS format is required if you wish to use the disk with a PC.

1. xx = Last two digits of HP-IB address.

2. These options apply to disk drive and memory card data collection. They do not apply when

collecting data with Addr=9.

3. A DOS file name extension. For example, the file name may be CELL1.EXT.

4. DOS is used if the disk format isDOS.HP-UX is used if the disk format is LIF.

Table 7 Data Collection (Saving/Retrieving Tests) Configuration Summary

Inst# Calling Name Options Model Addr Description

1 DATA Collection don’t care 7xx

To HP-IB disk drive

1 DATA Collection don’t care 1 To memory card

Options:

File types of ASCII,

or BDAT,

or (EXT)

or blank,

REC=xxxxx,

(number of records)

don’t care 7xx

LIF format

DOS file type

DOS or HP-UX file type

Number of records

1 DATA Collection don’t care 9 Serial to external

computer (laptop)