Technical data

182 S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb

Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions

Pass/Fail Limit 38, TX Output Power at Low Switch Setting

This sets the pass/fail limits for testing a transmitter’s output power at its low-

power setting.

Pass/Fail limits are determined from an applicable radio specification or industry

standard, such as:

• Radio specification: RF Power

• Industry standard: EIA/TIA-603, Section 2.2.1, Carrier Output Power Rating

For Example:

If your radio specification defines the RF output power as 3 Watts and you want to

test both limits on your radio, you could enter

2 in the lower-limit column and

choose an appropriate upper-limit, for example

4 Watts. Limits are entered in

Watts.

It’s Used in the Following Tests:

TEST_03. TX Output Power

TEST_21. TX Quick Test