Technical data

180 S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb

Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions

Pass/Fail Limit 36, Output Power at Low Supply

This sets the pass/fail limits for testing the low-power setting for the radio’s

external power supply (if one is used).

Pass/Fail limits are determined from an applicable radio specification, such as:

• Radio specification: Power Requirements

For example:

If your radio’s power supply is rated to output 7 Watts at its low-supply setting,

you might enter

6 in the lower-limit column and 8 in the upper-limit column and

test both limits. Limits are entered in Watts.

It’s Used in the Following Tests:

TEST_03. TX Output Power

TEST_21. TX Quick Test