Technical data

170 S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb
Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions
Pass/Fail Limit 26, TX CTCSS Frequency Error
Pass/Fail Limit 26, TX CTCSS Frequency Error
This sets the pass/fail limits for testing transmitter’s Continuous-Tone-Controlled
Squelch System (CTCSS) frequency error.
Pass/Fail limits are determined from an applicable industry standard, such as:
• Industry standard: EIA/TIA-603, Section 2.4.12, CTCSS Encoder Frequency
For Example:
If your industry standard defines the acceptable CTCSS frequency error as
±3%
and you want to test both limits on the radio, enter
−3 in the lower-limit column
and
3 in the upper-limit column. Limits are entered in %.
It’s Used in the Following Test:
TEST_10. TX CTCSS/CDCSS Deviation, Freq/Code