Technical data

163
S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb
Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions
Pass/Fail Limit 19, TX Audio Distortion
Pass/Fail Limit 19, TX Audio Distortion
This sets the pass/fail limits for testing a transmitter’s audio distortion.
Pass/Fail limits are determined from an applicable radio specification or industry
standard, such as:
• Radio specification: Audio Distortion
• Industry standard: EIA/TIA-603, Section 2.2.7, Audio Distortion
For Example:
If your industry standard defines audio-frequency harmonic distortion to be not
more than 10% and you want to test the radio’s upper limits, enter
0 in the lower-
limit column and
10 in the upper-limit column. Limits are entered in %.
It’s Used in the Following Tests:
TEST_06. TX Audio Distortion
TEST_21. TX Quick Test