Technical data

148 S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb
Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions
Pass/Fail Limit 4, RX Audio Frequency Response Roll <0.5 kHz
Pass/Fail Limit 4, RX Audio Frequency Response Roll <0.5 kHz
This sets the pass/fail limits for testing a receiver’s audio-frequency-response roll
off for measurements less than 0.5 kHz.
Pass/Fail limits are determined from an application radio specification or industry
standard, such as:
• Radio standard: Audio Response
• Industry standard: EIA/TIA-603, Section 2.1.10, Audio Frequency Response
For Example:
If your radio specification defines audio response roll off for frequencies less than
500 Hz to be a maximum of 6 dB/octave and you want to test the radio’s upper
limits, enter
0 in the lower-limit column and 6 in the upper-limit column. Limits
are entered in dB.
It’s Used in the Following Tests:
TEST_13. RX Audio Frequency Response
TEST_20. RX Quick Test