Technical data

143

S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb

Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions

Parameter 33, XX Secure Frequency Info

This test parameter allows you to secure the radio’s channels .

This test parameter provides security for the radio by preventing the channel’s

frequency from being seen on the test set’s display and from being printed in the

test results. Instead, the receive frequency is shown as “

RX=FXXX MHz” and the

transmit frequency is shown as “

TX=FXXX MHz” where “FXXX” is the secured

frequency.

For Example:

If you want to prevent the radio channel’s receive and transmit frequencies from

being viewed or printed with the test results, enter

1 in the value column,

otherwise, enter

0 in the value column.

It’s Used in the Following Tests:

All tests if this test parameter is turned on (that is, set to

1).