Technical data

141

S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb

Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions

Parameter 31, TX Output Power @Low Switch

This test parameter allows you to test for transmitter output power with the power

supply voltage set to its low-switch setting.

For Example:

If your radio has a high/low-switch setting and you want to test the transmitter for

output power at the low switch setting, you would enter

1 in the value column,

otherwise, enter

0 in the value column.

It’s Used in the Following Tests:

TEST_03. TX Output Power

TEST_21. TX Quick Test