Technical data

138 S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb
Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions
Parameter 28, TX Dekey Between TX Tests
Parameter 28, TX Dekey Between TX Tests
This test parameter forces the test operator to de-key the radio between each
transmitter (TX) test or allows the radio to transmit continuously.
For Example:
If you want the Test Procedure sequence to proceed as quickly as possible and are
not concerned that the radio transmits continuously between tests or if your radio
has a transmitter timeout feature, enter
0 in the value column, otherwise, enter 1 in
the value column.
It’s Used in the Following Tests:
All transmitter tests if this test parameter is turned on (that is, set to
1).