Technical data

136 S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb

Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions

Parameter 26, TX CD/CTCSS Filter 1 Opt

This test parameter allows the CD/CTCSS filter (test set Option 010, 400 Hz

High-Pass Filter) to be used by the test set if one is installed. If the CD/CTCSS

filter is installed, “

400 Hz HPF” appears in the AF Analyzer’s Filter 1 field.

For Example:

If you want the installed CD/CTCSS filter to be used during receiver and

transmitter testing, enter

1 in the value column, otherwise, enter 0 in the value

column.

It’s Used in the Following Tests:

All tests when the CD/CTCSS filter is installed in the test set.