Technical data

135

S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb

Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions

Parameter 25, TX CD/CTCSS Control

This test parameter allows the transmitted CTCSS tone code or CDCSS code

word to be controlled by the test operator.

This test parameter affects all transmitter tests in that if the radio uses CTCSS or

CDCSS squelch and you indicate that no control is available, then the software

does not prompt the test operator to disable the TX tone squelch during testing but

continues testing whether the tone is on or off.

For Example:

If you want to prompt the test operator to disable the tone squelch during testing,

enter

1 in the value column, otherwise, enter 0 in the value column.

It’s Used in the Following Tests:

All transmitter tests when CTCSS or CDCSS is available (as indicated by

Parameter 24, TX CD/CTCSS Available