Technical data

134 S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb

Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions

Parameter 24, TX CD/CTCSS Available

This test parameter lets the test set know that the radio transmits a carrier

modulated with a CTCSS tone code or CDCSS code word.

Besides being used in the test shown below, this test parameter affects all

transmitter tests by prompting the test operator to disable the TX tone squelch

before continuing with testing.

For Example:

If you want the transmitted CTCSS tone code tested for deviation and frequency

accuracy, enter

1 in the value column, otherwise, enter 0 in the value column.

It’s Used in the Following Tests:

All transmitter tests when CTCSS or CDCSS is available (when this test

parameter is set to

1).