Technical data

132 S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb
Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions
Parameter 20, TX Audio Distn % Full Rated System Dev
Parameter 20, TX Audio Distn % Full Rated System Dev
This parameter specifies the maximum percent of full rated frequency deviation
to use when testing audio distortion.
For Example:
If your industry standard specifies that Audio Distortion is measured at 60% of
the maximum rated frequency deviation, enter
60 in the value column. The value
is entered in percent.
It’s Used in the Following Tests:
TEST_06. TX Audio Distortion