Technical data

131
S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb
Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions
Parameter 19, RX Usable Sensitivity SINAD Level
Parameter 19, RX Usable Sensitivity SINAD Level
This test parameter sets the test set RF generator’s output level to the standard
signal-to-noise ratio (SINAD) which is used in receiver sensitivity testing.
For Example:
If your industry standard specifies the standard SINAD ratio as 12 dB, enter
12 in
the value column. The value is entered in dB.
It’s Used in the Following Tests:
TEST_14. RX Usable Sensitivity
TEST_19. RX Variation of Sens with Freq
TEST_20. RX Quick Test