Technical data

127
S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb
Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions
Parameter 15, RX Squelch Preset Only
Parameter 15, RX Squelch Preset Only
This test parameter allows you to use the preset squelch setting on the radio, in
which case, the test operator is not prompted to adjust the squelch setting. For
radios without an adjustable squelch knob, you’ll want to set this test parameter to
1.
For Example:
If you want to use the receiver’s preset setting for squelch, enter
1 in the value
column. If you want to allow the test operator to adjust squelch during testing,
enter
0 in the value column.
It’s Used in the Following Test:
TEST_15. RX Audio Squelch Sensitivity