Technical data

125
S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb
Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions
Parameter 13, RX Squelch Blocking Step Frequency
Parameter 13, RX Squelch Blocking Step Frequency
This test parameter sets the step-size to vary the audio frequency while testing
receiver squelch blocking.
For Example:
If you want the audio frequency to be varied in 500 Hz steps during the receiver
squelch-blocking test, enter
0.5 in the value column. The value is entered in kHz.
It’s Used in the Following Test:
TEST_16. RX Squelch Blocking