Technical data

122 S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb

Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions

Parameter 10, RX CT/CDCSS Deviation

This test parameter sets the amount of deviation on the signal modulating the

CTCSS tone which is input to the receiver’s antenna during the CTCSS opening

test. With CDCSS, the code word produces the necessary deviation.

For Example:

If you want the CTCSS tone to deviate 750 Hz during the CTCSS opening test,

enter

0.75 in the value column. The value is entered in kHz.

It’s Used in the Following Test:

TEST_17. RX CTCSS/CDCSS Opening