Technical data

118 S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb

Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions

Parameter 6, RX Audio Freq Response Step Frequency

This test parameter sets the step size used to vary the modulation frequency when

testing the receiver’s audio-frequency response.

For Example:

If your industry standard requires that receiver audio-frequency response is to be

tested from 300 Hz to 3 kHz and you want vary the modulation frequency in 500

Hz steps, enter

0.5 in the value column. The value is entered in kHz.

It’s Used in the Following Tests:

TEST_13. RX Audio Frequency Response

TEST_20. RX Quick Test