Technical data

116 S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb
Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions
Parameter 4, RT Low Supply Voltage
Parameter 4, RT Low Supply Voltage
This test parameter sets the low-power setting on the radio’s external power
supply (if one is used) when testing extreme voltages during the output power test.
For Example:
If your industry standard specifies the low-supply voltage required for extreme
measurements as
−20% of the normal (nominal) supply voltage, which is +13.2V
for the radio’s power supply, enter
10.6 in the value column. The value is entered
in Vdc.
It’s Used in the Following Tests:
TEST_03. TX Output Power
TEST_21. TX Quick Test