Technical data

115

S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb

Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions

Parameter 3, RT High Supply Voltage

This test parameter sets the high-power setting on the radio’s external power

supply (if one is used) when testing extreme voltages during the output power test.

For Example:

If your industry standard specifies the high-supply voltage required for extreme

measurements as +20% of the normal (nominal) supply voltage, which is +13.2V

for the radio’s power supply, you would enter

15.8 in the value column. The

value is entered in Vdc.

It’s Used in the Following Tests:

TEST_03. TX Output Power

TEST_21. TX Quick Test