Technical data

112 S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb

Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions

Test Parameter Descriptions

Test parameters are used to define the conditions under which a test will run. You

may edit the test parameters to change the default values to meet your specific

testing needs and conditions. Test parameters may be used in one or more tests.

For information on editing test parameters,

see "Customizing Testing," in chapter

2, on page 32

Test parameters remain in battery-backed-up memory until you select a procedure

to run. If you wish to prevent them from being lost when a new procedure is

selected, you will have to save them in a procedure.

see "Saving a Test Procedure,"

in chapter 2, on page 50

To print the list of test parameters,

see "To print TESTS screens:," in chapter 5, on

page 219

There are several different types of test parameters:

• Receiver/Transmitter Test Parameters (RT)

• Receiver Test Parameters (RX)

• Transmitter Test Parameters (TX)

• Extra Test Parameters (XX)

NOTE: Refer to chapter 2 in this manual for details about selecting test parameters for your FM

radio.