Technical data

110 S:\hp11807a\OPT001\USRGUIDE\BOOK\chapters\descrptn.fb

Chapter 4, Test, Parameter, and Pass/Fail Limit Descriptions

TEST_20. RX Quick Test

This test contains a subset of the complete test list for receivers. It is designed to

do a quick evaluation of the receiver using the following tests:

• TEST_18. RX Audio Sensitivity

• TEST_12. RX Audio Distortion

• TEST_14. RX Usable Sensitivity

• TEST_11. RX Hum and Noise

• TEST_15. RX Audio Squelch Sensitivity (if CTCSS/CDCSS is not available)

• TEST_17. RX CTCSS/CDCSS Opening (if CTCSS/CDCSS is available and

controllable)

• TEST_16. RX Squelch Blocking

• TEST_13. RX Audio Frequency Response

Pass/Fail Limits Used

Refer to each test shown above for the pass/fail limits that are used.

Test Parameters Used

Refer to each test shown above for the test parameters that are used.