Specifications

91
Application notes
6671A/72A/81A/82A/90A
System DC Power Supplies Product Overview
5988-3050EN
Agilent DC Power Supplies for
Base Station Testing
5988-2386EN
10 Practical Tips You Need to Know
About Your Power Products
5965-8239E
Supplemental characteristics
for all model numbers
DC floating voltage: Output terminals can
be floated up to ±60 VDC maximum from
chassis ground
Remote sensing: Up to half the rated
output voltage can be dropped in each
load lead. The drop in the load leads
subtracts from the voltage available
for the load.
Command processing time: Average time
required for the output voltage to begin
to change following receipt of digital data
is 20 ms for power supplies connected
directlytotheGPIB
Modulation: (analog programming of
output voltage and current):
Input signal: 0 to -5 V for voltage,
0 to +5 V for current
Input impedance: 30 kΩ/or greater
AC Input (47 to 63 Hz): 180 to 235 VAC
(line-to-line, 3 phase), 27.7 Arms
maximum worst case, 21.4 Arms
nominal; 360 to 440 Vac, 14.3 Arms
maximum worst case, 10.7 Arms
nominal (maximum line current
includes 5% unbalanced phase voltage
condition.) Output voltage derated
5% at 50 Hz and below 200 Vac.
Input power: 7350 VA and 6000 W
maximum; 160 W at no load
GPIB interface capabilities: SH1, AH1, T6,
L4, SR1, RL1, PP0, DC1, DT1, E1, and C0.
IEEE-488.2 and SCPI command set.
Software driver:
•IVI-COM
•VXIPlug&Play
Size: 425.5 mm W x 221.5 mm H x
674.7 mm D (16.75 in x 8.75 in x 25.56 in)
Weight: Net, 51.3 kg (113 lbs);
shipping, 63.6 kg (140 lbs)
Warranty: Three years
Ordering information
Opt 208 180 to 235 VAC, 3 phase,
47 to 63 Hz
Opt 400 360 to 440 VAC, 3 phase,
47 to 63 Hz
Opt 602 Two bus bar spacers
for paralleling power supplies
(p/n 5060-3514)
Single-Output: 5000 W GPIB (Continued)
More detailed specifications at www.agilent.com/find/6680
High Performance DC Power Supplies speed and accuracy for test optimization
Opt 0L1 English printed users and
programming guide (full documentation
on CD-ROM)
Opt 0B3 English printed service manual
Accessories
* 1CM028A Rack mount flange kit
88.1 mm H (3U) and 132.6 mm H (2U) -
4 brackets (5U total)
* 1CP014A Double rack mount flange
and handle kit 88.1 mm (2U) and
132.6 mm H (3U)
p/n 5060-3513 Three 30-A replacement
fuses for 180 to 235 VAC line
p/n 5060-3512 Three 16-A replacement
fuses for 360 to 440 VAC line
E3663AC Support rails for Agilent
rack cabinets
p/n 5080-2148 Serial link cable
2 m (6.6 ft.)
* Support rails required
Side
Output
Buss Bars
Top
12.7 mm
0.5"
28.6 mm
1.13"
30.2 mm
1.19"
65.1 mm
2.56"
27.8 mm
1.09"
9.5 mm
0.38"
12.7 mm
0.5"
674.7 mm
26.56"
667.3 mm
26.27"
574 mm
22.6"
221.5 mm
8.75"
425.5 mm
16.75"
+
–
Buss Bar Detail
Rear
3/8" Diameter (6)
3 3/4"
Agilent Models: 6680A, 6681A, 6682A, 6683A, 6684A