Specifications
82
Ordering information
Opt 200 174 to 220 VAC, 47 to 63 Hz
(Japan only)
Opt 230 191 to 250 VAC, 47 to 63 Hz
Opt 0L1 English printed users and
programming guide (full documentation
on CD-ROM)
Opt 0B3 English printed service manual
A line cord option must be specified,
see the AC line voltage and cord section.
Accessories
* 1CM003A Rack mount flange kit
132.6 mm H (3U) – two flange brackets
* 1CP002A Rack mount flange and handle
kit 132.6 mm H (3U) – two brackets and
front handles
p/n 1494-0059 Accessory slide kit
p/n 1252-3698 7-pin analog plug
p/n 1252-1488 4-pin digital plug
p/n 5080-2148 Serial link cable
2 m (6.6 ft)
E3663AC Support rails for
Agilent rack cabinets
* Support rails required
Single-Output: 2000 W GPIB (Continued)
Specifications
(at 0° to 55°C unless
otherwise specified)
6675A- 6675A- 6675A- 6675A
J07 J08 J09 J11
Special order Special order Special order Special order
option option option option
Number of outputs
1 1 1 1
GPIB
Yes Yes Yes Yes
Output ratings
Output voltage 200 V 100 V 110 V 150 V
Output current 11 A 22 A 20 A 15 A
Programming accuracy
at 25°C ±5°C
Voltage 0.04%+ 200 mV 120 mV 120 mV 150 mV
Current 0.1%+ 8 mA 15 mA 13.5 mA 11 mA
Ripple and noise
from 20 Hz to 20 MHz
Voltage rms 3.5 mV 1.9 mV 1.9 mV 2.5 mV
Voltge peak to peak 25 mV 16 mV 16 mV 18 mV
Current rms 15 mA 15 mA 13.5 mA 12 mA
Readback accuracy at 25°C ±5°C
(percent of reading plus fixed)
System models only
Voltage 0.05%+ 300 mV 180 mV 180 mV 225 mV
±Current 0.1%+ 12 mA 22 mA 20 mA 15 mA
Load and line regulation
Voltage 0.002% + 7 mV 4 mV 4 mV 6 mV
Current 0.005% + 1 mA 4 mV 4 mV 1 mA
Transient response time Less than 900 s for the output voltage to recover 100 mV following a
change in load from 100% to 50% or 50% to 100% of the output current
rating of the supply
Supplemental Characteristics (Non-warranted characteristics determined by design and
useful in applying the product)
Average resolution
Voltage 50 mV 30 mV 30 mV 37.5 mV
Current 2.75 mA 4.5 mA 4.5 mA 3.75 mA
OVP 360 mV 215 mV 215 mV 270 mV
Output voltage programming
response time*
(excluding command 350 ms 195 ms 195 ms 250 ms
programming processing time)
* Full load programming rise/fall time (10% to 90% or 90% to 10%) with full resistive load equal to rated output
voltage/rated output current.
More detailed specifications at
www.agilent.com/find/6670
High Performance DC Power Supplies speed and accuracy for test optimization