Specifications

51
AC input: (AC input frequency 47 to 63 Hz)
Voltage 100 VAC 120 VAC 220 VAC 240 VAC
Current 4.4 A 3.8 A 2.2 A 2.0 A
Input power 480 VA, 400 W at full load;
60 W at no load
GPIB interface capabilities SH1, AH1, T6,
L4, SR1, RL1, PP0, DC1, DT1, E1, and C0.
IEEE-488.2 and SCPI-compatible com-
mand set
Software driver:
•IVI-COM
•VXIPlug&Play
Regulatory compliance: Complies
with UL 3111-1, IEC 61010-1.
Size: 425.5 mm W x 88.1 mm H x
439 mm D (16.75 in x 3.5 in x 17.3 in)
Weight: Net, 14.2 kg (31.4 lb);
shipping, 16.3 kg (36 lb)
Warranty: Three years
Single-Output: 200 W GPIB (Continued)
More detailed specifications at www.agilent.com/find/6640
High Performance DC Power Supplies speed and accuracy for test optimization
Ordering information
Opt 100 87 to 106 VAC, 47 to 63 Hz
Opt 120 104 to 127 VAC, 47 to 63 Hz
Opt 220 191 to 233 VAC, 47 to 63 Hz
Opt 240 209 to 250 VAC, 47 to 63 Hz
Opt 0L1 English printed users and
programming guide (full documentation
on CD-ROM)
Opt 0B3 English printed service manual
Accessories
* 1CM002A Rack mount flange kit
88.1 mm H (2U), 1.75 inch hole spacing,
two flange brackets
* 1CP001A Rack mount flange and handle
kit 88.1 mm H (2U) – two brackets and
front handles
p/n 1494-0060 Accessory slide kit
p/n 1252-3698 7-pin analog plug
p/n 1252-1488 4-pin digital plug
p/n 5080-2148 Serial link cable
2 m (6.6 ft)
E3663AC Support rails for Agilent
rack cabinets
* Support rails required
Agilent Models: 6641A, 6642A, 6643A, 6644A, 6645A
Top
Side
Rear
Output
434.3 mm
17.1"
425.5 mm
16.75"
421.7 mm
16.6"
88.1 mm
3.5"
100 mm
3.93"
12.7 mm
0.5"
Terminal Screw Size: m4 x 0.7 x 8 mm
A Thomas & Betts 22-18 ring
crimp-on will fit in this area
240 VDC Max to
6 - 32 x 3/8 Screws
+
–
+–
{}