Specifications

50
Single-Output: 200 W GPIB (Continued)
Specifications
(at 0° to 55°C unless
otherwise specified)
6641A- 6643A- 6644A- 6645A- 6645A-
J04 J11 J09 J05 J06
Special order Special order Special order Special order Special order
option option option option option
Number of outputs
1 1 1 1 1
GPIB
Yes Yes Yes Yes Yes
Output ratings
Output voltage 13 V 40 V 70 V 150 V 170 V
Output current (40°C) 15.3 A 5 A 3 A 1.2 A 1 A
Maximum current (50°C/55°C)
13.77 A/13 A 4.5 A/4.25 A 2.7 A/2.55 A 1.08 A/1.02 A 0.9 A/0.85 A
Programming accuracy at 25°C ±5°C
Voltage 0.06% + 8.5 mV 17.5 mV 31 mV 65 mV 74 mV
Current 0.15% + 21 mA 6.7 mA 4.1 mA 1.7 mA 1.7 mA
Ripple and noise
from 20 Hz to 20 MHz
Voltage rms 300 V 450 V 600 V 900 V 1 mV
peak-peak 3 mV 3.5 mV 6 mV 9 mV 10 mV
Current rms 8 mA 3 mA 1.5 mA 1 mA 1 mA
Readback accuracy at 25°C ±5°C
(percent of reading plus fixed)
Voltage 0.07% + 10 mV 30 mV 47 mV 100 mV 140 mV
+Current 0.15% + 15 mA 5 mA 3 mA 1.3 mA 1.3 mA
–Current 0.35% + 40 mA 12 mA 6.8 mA 2.9 mA 2.9 mA
Load regulation
Voltage 1 mV 3 mV 4.5 mV 7 mV 8 mV
Current 1 mA 0.25 mA 0.25 mA 0.25 mA 0.25 mA
Line regulation
Voltage 0.5 mV 1 mV 1.5 mV 2.5 mV 3 mV
Current 1 mA 0.25 mA 0.25 mA 0.25 mA 0.25 mA
Transient response time Less than 100 s for the output voltage to recover to its previous level (within 0.1% of
the voltage rating of the supply or 20 mV, whichever is greater) following any step change in load current of up to
50% of rated current
Supplemental Characteristics
(Non-warranted characteristics determined by design and
useful in applying the product)
Average resolution
Voltage 3.5 mV 12 mV 1.4 mV 37.5 mV 42.5 mV
Current 5 mA 2 mA 1.2 mA 0.5 mA 0.5 mA
OVP 23 mV 62 mV 110 mV 250 mV 285 mV
OVP accuracy 260 mV 800 mV 1.5 mV 3 V 3.4 V
More detailed specifications at www.agilent.com/find/6640
High Performance DC Power Supplies speed and accuracy for test optimization
Application notes
10 Practical Tips You Need to
Know About Your Power Products
5965-8239E
10 Hints for Using Your Power Supply
to Decrease Test Time
5968-6359E
Understanding Linear Power Supply
Operation (AN1554)
5989-2291EN
Modern Connectivity -
Using USB and LAN I/O Converters
(AN 1475-1)
5989-0123EN
Supplemental characteristics
for all model numbers
DC floating voltage: Output terminals
can be floated up to ±240 VDC from
chassis ground
Remote sensing: Up to half the rated
output voltage can be dropped in each
load lead. The drop in the load leads
subtracts from the voltage available
for the load.
Command processing time: Average time
required for the output voltage to begin to
change following receipt of digital data is
20 ms for the power supplies connected
directlytotheGPIB
Output programming response time: The
rise and fall time (10/90% and 90/10%)
of the output voltage is less than 15 ms.
The output voltage change settles within
1LSB(0.025%xratedvoltage)offinal
value in less than 60 ms.
Down programming: An active down
programmer sinks approximately
20% of the rated output current
Modulation: (Analog programming
of output voltage and current)
Input Signal: 0 to -5 V
Input Impedance: 10 k nominal