Specifications

46
Supplemental characteristics
for all model numbers
DC floating voltage: Output terminals
can be floated up to ±240 VDC
maximum from chassis ground
Remote sensing: Up to two volts dropped
in each load lead. Add 2 mV to the
voltage load regulation specification
for each one volt change in the postive
output lead due to load current change.
Command processing time: Average time
required for the output voltage to begin
to change following receipt of digital date
is 4 ms for the power supplies connected
directlytotheGPIB.
Output programming response time: The
rise and fall time (10/90% and 90/10%)
of the output voltage is less than 2 ms.
The output voltage change settles within
1LSB(0.025%xratedvoltage)offinal
value in less than 6 ms.
GPIB interface capabilities: IEEE-488.2,
SCPI command set, and 6630A Series
programming compatability
Input power: (full load): 1.6 A, 100 W
(6611C: 2.2 A, 120 W)
Regulatory compliance: Complies with
EMCdirective89/336/EEC(ISM1B).
Software driver:
VXIPlug&Play
Size: 212.8 mm W x 88.1 mm H x
368.3 mm D (8.4 in x 3.5 in x 14.5 in)
Weight: 8.2 kg (18.16 lb) net;
10.6 kg (23.5 lb) shipping
Warranty: Three years
Single-Output: 40-50 W GPIB (Continued)
More detailed specifications at www.agilent.com/find/6610
High Performance DC Power Supplies speed and accuracy for test optimization
Ordering information
Opt 100 87 to 106 VAC, 47 to 63 Hz
Opt 120 104 to 127 VAC, 47 to 63 Hz
Opt 220 191 to 233 VAC, 47 to 63 Hz
Opt 230 207 to 253 VAC, 47 to 63 Hz
Opt 760 Isolation and reversal relays
Opt 0L1 English printed users
and programming guide
(full documentation on CD-ROM)
Opt 0B0 English printed service manual
Accessories
* 1CM002A Rack mount flange kit
88.1 mm H (2U), 1.5 inch hole space
for side by side mounting of two units.
Requires lock link kit (and support rails)
5061-9694 Lock link kit
* 1CM024A Rack mount flange kit
88.1 mm H (2U), one bracket, one
half-module bracket, and filler panel
E3663AC Support rails for Agilent rack
cabinets
* Support rails required
Agilent Models: 6611C, 6612C, 6613C, 6614C
Top
Side
368.3 mm
14.5"
368.3 mm
14.5"
212.8 mm
8.4"
88.1 mm
3.5"
Rear
88.1 mm
3.5"