Specifications

New
Products
N6900/N7900 Series Advanced Power System
The Advanced Power System (APS) family consists of 1 kW and 2 kW system
DC power supplies that deliver a new level in power supply performance enabled
by Agilent’s exclusive VersaPower architecture. The APS family was designed to
help you overcome your toughest power test challenges by delivering industry-
leading specifications and innovative features in an integrated solution for
advanced automated test equipment (ATE) power testing needs.
VersaPower architecture delivers the fastest, most accurate, integrated
power system:
•Acceleratetest-systemthroughputwithindustry-leadingspeed
•CaptureyourDUT'scurrentprofilewithaccuratemeasurements
•Reduce your ATE development time and cost with highly integrated capabilities
APS N6900 Series DC Power Supplies are designed for ATE applications
where high performance is critical.
APS N7900 Series Dynamic DC Power Supplies are designed for ATE applications
where high-speed dynamic sourcing and measurement are needed.
Two power ranges deliver a large amount of power in a small test-system footprint:
•1kWmodelshavea1Ufull-rackfootprint
•2kWmodelshavea2Ufull-rackfootprint
•Built-inparallelingcapabilityupto10kW
See Page 63
N8900 Series Autoranging System DC Power Supplies
The Agilent Technologies N8900 Series provides 5, 10, and 15 kW autoranging,
single-output programmable DC power for ATE applications that require just
the right amount of performance at just the right price. The N8900 Series power
supplies’ autoranging output characteristic enables unprecedented flexibility by
offering a wide range of voltage and current combinations at full power. Power
supplies with “rectangular,” or traditional, output characteristics provide full
power at only one voltage and current combination. Just one N8900 does the
job of multiple power supplies. It’s like having many power supplies in one!
The N8900 Series provides stable output power, built-in voltage and current
measurements, and autoranging output voltage and current from 80 to 1500 V
and 10 to 510 A. These supplies offer many system-ready features like multiple
standard I/O interfaces to simplify and accelerate test-system development and
compact 3U design to save rack space. If more power is required, easily parallel
multiple N8900 units to create “one” power supply with > 100 kW of total out-
put power. The built-in master/slave control enables programming as if it’s just
one big power supply; no need to program each supply individually.
See Page 37
III
N6900/N7900 Series
Advanced Power System
N8900 Series
Autoranging System
DC Power Supplies