Specifications

26
Ordering information
Opt 001 Front panel has only line switch,
line indicator, and OVP adjust
(6030A–33A and 6038A only)
Opt 100 87 to 106 VAC, 48 to 63 Hz
(power supply output is derated to 75%)
Opt 120 104 to 127 VAC, 47 to 63 Hz
Opt 220 191 to 233 VAC, 48 to 63 Hz
Opt 240 209 to 250 VAC, 48 to 63 Hz
Opt 0L1 English printed operating
manual (full documentation on
CD-ROM)
Opt OB3 English printed service manual
Opt J01 Stabilization for loads up to
10 Henries (not available on 6033A)
A line cord option must be specified,
see the AC line voltage and cord section.
Autoranging: 200 W and 1000 W GPIB (Continued)
More detailed specifications at www.agilent.com/find/6030
Basic DC Power Supplies essential features for a tight budget
212.3 mm
8.36"
421.6 mm
16.6"
16.5 mm
0.65"
22.0 mm
0.87"
19.6 mm
0.77"
177.0 mm
6.97"
31.8 mm
1.25"
Top
Side
170.6 mm
6.72"
13.5 mm
0.53"
208.8 mm
8.22"
Rear
Does not apply
to model 6023A
Screw Size
M3.5 x 0.6
VM
IM
M
VP
IP
P
B6
B1
Terminal Strip Detail
Agilent Models: 6033A, 6038A
Accessories
5080-2148 Serial link cable,
2 m (6.6 ft)
1494-0060 Rack slide kit
E3663AC Support rails for
Agilent rack cabinets
For models: 6033A and 6038A
* 1CM001A Rack mount flange kit
177.0 mm H (4U) - one bracket,
one half-module bracket
* 1CM034A Rack mount flange kit
177.0 mm H (4U) - two flange brackets
and lock link kit for mounting two
6033A or 6038A units side by side.
For models: 6030A, 6031A,
6032A, 6035A
* 1CM003A Rack mount flange kit
132.6 mm H (3U) - two flange brackets
* 1CP002A Rack mount flange and handle
kit 132.6 mm H (3U) - two brackets
and front handles
* Support rails required